V-belt Gates SPZ 1462 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1462 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1462 MN and any equivalents.
When you need a replacement belt, the fastest way to a firm quote is to send the full part number and the drive details. This page covers the Gates SPZ 1462 MN from the Super HC MN series, a narrow wedge V-belt with profile SPZ and length 1462 mm. Use the checklist below to make sure your request includes everything we need to confirm the right belt.
Start with the belt marking. For this belt, the code is SPZ 1462 MN. Also note the brand and series: Gates Super HC MN. If the old belt is worn or dirty, clean the back and read the printing carefully. A photo of the marking helps us verify the part number and avoid a wrong match.
Next, send the drive data. We need the sheave or pulley part numbers, the number of grooves, and the distance between shaft centers. If the drive uses more than one belt, tell us how many belts are in the set so we can quote the full set. Also mention any obvious wear on the sheaves, such as grooves that are shiny or worn deep.
Finally, include the application and environment. Tell us what the drive powers, how often it runs, and any conditions like dust, oil, or heat. This belt has a top width of 9.7 mm, a height of 8 mm, and a 40° angle. With the part number and these details, we can confirm the SPZ 1462 MN or suggest an equivalent that fits your drive.
Dimensions
- Section
- SPZ
- Length
- 1462mm
Frequently asked questions
- What part number should I send for a quote?
- Send the complete code from the belt: SPZ 1462 MN. Also include the brand and series, Gates Super HC MN, if you have it. If the marking is hard to read, send a clear photo of the back of the belt.
- What drive details do you need besides the belt number?
- We need the sheave part numbers, the number of grooves, the center distance between shafts, and the number of belts in the drive. If you are replacing a set, tell us how many belts you need.
- Can you help if the belt is worn and I cannot read the number?
- Yes. Measure the top width, height, and outside length if possible, and send photos of the belt and the drive. We can use those details to help identify the correct belt.