V-belt Gates SPZ 1162 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1162 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1162 MN and any equivalents.
The Gates SPZ 1162 MN is a narrow wedge V-belt in the Super HC MN series. It is built to the SPZ profile with a 1162 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. Use these figures to confirm the belt matches your drive before you request a quote.
The SPZ profile identifies the belt's cross-section and its fit in the pulley groove. The 1162 mm length is the datum you match to the drive's required belt length. Because SPZ is a narrow wedge profile, the belt is suited to drives designed for this section rather than a classical V-belt.
When checking a replacement, read the marking on the back of the old belt and compare it with the part number. If the marking is worn or missing, measure the top width and height and confirm the length against the drive layout. The 9.7 mm top width, 8 mm height and 40° angle are the dimensions to verify.
Send the part number, SPZ 1162 MN, by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt for your drive, include the old belt's marking and the drive details so the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1162mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPZ profile defines the belt's cross-section for the pulley groove, and the 1162 mm length is the belt's length. Together they identify the size needed for the drive.
- What dimensions should I check before ordering?
- Confirm the SPZ profile and 1162 mm length, and verify the 9.7 mm top width, 8 mm height and 40° angle against the old belt or the drive specification.
- How do I request a quote for the Gates SPZ 1162 MN?
- Send the part number SPZ 1162 MN by WhatsApp or email. If you need help confirming the belt, include the old belt's marking and your drive details.