V-belt Gates SPZ 1187 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1187 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1187 MN and any equivalents.
The Gates SPZ 1187 MN is a narrow wedge V-belt in the Super HC MN series, built for drives that use an SPZ profile. To match it to the belt being replaced, read the marking on the back of the old belt and confirm the profile and length. This page lists the dimensions you need to compare before you request a quote.
Start with the old belt in hand. Look for the profile and length on the back: this belt is marked SPZ and measures 1187 mm. Its top width is 9.7 mm, its height is 8 mm, and its included angle is 40°. If the old belt shows the same SPZ profile and 1187 mm length, this Gates belt is the direct match.
If the marking is worn or unreadable, measure the top width and the outside length and compare them to the figures above. A belt with a different profile or length will not seat correctly in the pulley grooves, so confirm both before ordering. The Super HC MN series covers narrow wedge drives where space and weight matter.
Send the part number SPZ 1187 MN, or the profile and length from your old belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt for your drive.
Dimensions
- Section
- SPZ
- Length
- 1187mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. If it reads SPZ and 1187 mm, this Gates SPZ 1187 MN is the match. You can also measure the top width (9.7 mm) and height (8 mm) to compare.
- What if the marking on my old belt is no longer readable?
- Measure the top width and the outside length of the old belt. Compare those to the 9.7 mm top width and 1187 mm length listed here. If they match and the profile is SPZ, this belt fits.
- What information should I send for a quote?
- Send the part number SPZ 1187 MN, or the profile and length from your old belt. If you have the old belt, a photo of the back marking helps us confirm the match.