V-belt Gates SPZ 1010 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1010 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1010 MN and any equivalents.
The Gates SPZ 1010 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a 1010 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. Use these figures to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. The part number, profile and length are usually printed there, and that marking is the fastest way to confirm you are ordering the same size. If the marking is worn or missing, measure the top width and the outside length of the old belt and compare them with the SPZ profile and 1010 mm length of this belt.
The SPZ profile is a narrow wedge section, so the belt sits deeper in the pulley groove than a classic V-belt. Check that the pulley grooves are clean and free of wear, and that the belt sits at the correct height in the groove. If the old belt shows cracking, glazing or uneven wear, inspect the drive before fitting a replacement.
When you request a quote, send the part number Gates SPZ 1010 MN, or the marking from the old belt, along with the quantity you need. If you are replacing more than one belt on the same drive, include the number of belts so the set can be matched. Our team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1010mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it shows SPZ 1010, or a profile and length that match the SPZ profile and 1010 mm length of this belt, it is the same size. You can also measure the top width and outside length and compare them with the 9.7 mm top width and 1010 mm length.
- What should I send with my quote request?
- Send the part number Gates SPZ 1010 MN, or the full marking from the old belt, and the quantity you need. If you are replacing a set, include the number of belts on the drive.
- Can you help if the old belt marking is unreadable?
- Yes. Send the profile and length you measured, or a photo of the old belt and the pulley grooves. We can help confirm the size or suggest an equivalent.