V-belt Gates SPZ 1012
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1012 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1012 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is your best starting point. This page covers the Gates Super HC SPZ 1012, a narrow wedge V-belt with profile SPZ and a length of 1012 mm. Use the numbers on the belt to confirm you are specifying the same size.
The Gates Super HC SPZ 1012 is a narrow wedge V-belt. It has a profile of SPZ, a top width of 9.7 mm, a height of 8 mm, and an angle of 40 degrees. Its length is 1012 mm. These dimensions are the ones to compare against the marking on your existing belt before you request a quote.
Read the back of the old belt carefully. You are looking for the profile and the length, typically shown as SPZ followed by the length in millimeters. If the marking is worn or unreadable, measure the belt and note the profile and length. The same size is also listed under Optibelt SPZ 1012, which may help if you are cross-referencing a belt from another brand.
To request a quote, send the part number SPZ 1012, the brand Gates, and the quantity you need by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include a photo of the old belt marking and the drive setup. Our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1012mm
Frequently asked questions
- How do I confirm the Gates Super HC SPZ 1012 is the right belt?
- Check the marking on the back of your old belt. It should show the profile SPZ and the length 1012 mm. If it does, this belt matches those dimensions.
- What are the dimensions of this belt?
- It has a profile of SPZ, a top width of 9.7 mm, a height of 8 mm, an angle of 40 degrees, and a length of 1012 mm.
- What should I send to get a quote?
- Send the part number SPZ 1012, the brand Gates, and the quantity you need by WhatsApp or email. If you have a photo of the old belt marking, include it so we can help confirm the size.