V-belt Gates SPZ 1000 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1000 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1000 MN and any equivalents.
This Gates SPZ 1000 MN belt is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact, high-capacity belt is needed. Confirm fit by checking the profile, length, and cross-section against your drive.
Narrow wedge V-belts like this SPZ profile are common on fans, pumps, compressors, and other driven equipment. The SPZ profile has a 9.7 mm top width, 8 mm height, and 40° angle. The datum length is 1000 mm. These dimensions let you match the belt to the pulley groove and the required center distance.
To confirm fit, read the marking on the old belt and compare it to SPZ 1000 MN. Check that the pulley grooves accept an SPZ cross-section and that the belt length matches your drive layout. If the old belt is worn or stretched, measure the drive or consult the equipment manual to verify the correct length.
When you request a quote, send the part number SPZ 1000 MN and the quantity you need. If you are unsure about the profile or length, include the old belt marking and details about the drive. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1000mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height, and 40° angle. The pulley grooves must be designed for this cross-section to ensure proper contact and performance.
- How do I confirm the length is correct?
- The belt has a 1000 mm length. Compare this to the marking on your old belt or measure the drive to verify the required length. If the old belt is stretched, check the equipment manual for the specified length.
- What information should I send for a quote?
- Send the part number SPZ 1000 MN and the quantity. If you need help confirming the fit, include the old belt marking and any details about the drive or equipment.