V-belt Gates C 246
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 246 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 246 and any equivalents.
This is a Gates Hi-Power II classical V-belt with a C profile and a length of 6299.2 mm. The C profile gives a 22 mm top width, 14 mm height and 40 degree angle. Use these three dimensions to confirm the belt fits your drive before you order.
The profile and length are the two numbers that matter most here. A C profile belt sits in a C section pulley groove, and the 40 degree angle is the included angle of the belt cross section. The 6299.2 mm length is the datum length for this belt, so match it to the length called out on your drive or to the marking on the belt you are replacing.
The same size is also listed under Optibelt C 246, so if you are comparing a C 246 across brands, the profile and length line up. Send the part number, the profile and the length when you request a quote, and the team can confirm this is the right belt or point you to the matching size.
Dimensions
- Section
- C
- Length
- 6299.2mm
Frequently asked questions
- What do the C profile and 6299.2 mm length mean for fit?
- C is the belt cross section, with a 22 mm top width, 14 mm height and 40 degree angle. The 6299.2 mm length is the datum length. Both must match the pulley groove and the drive length you are replacing.
- How do I confirm this is the belt I need?
- Read the marking on the back of the old belt and compare the profile and length. This belt is marked C 246. If your drive uses a C section groove and a 6299.2 mm datum length, this is the size to quote.
- What should I send to request a quote?
- Send the part number C 246, the brand Gates, and the profile and length from your old belt. If you have the old belt, a photo of the back marking helps confirm the size.