V-belt Gates C 245
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 245 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 245 and any equivalents.
This page covers the Gates Hi-Power II C 245, a classical V-belt with a C profile. The profile and the 6273.8 mm length are the two dimensions that identify the belt for your drive. Use both when checking a replacement or requesting a quote.
The C profile sets the belt's cross-section: 22 mm top width, 14 mm height and a 40-degree angle. These values determine whether the belt sits correctly in the sheave groove. The 6273.8 mm length is the datum you match against the old belt or the drive specification. A C-profile belt of a different length will not fit the same drive.
To confirm the belt, read the marking on the back of the old belt. Compare the profile and length against this C 245. If your drive uses multiple belts, replace them as a set so the load stays shared evenly across the grooves. Inspect the sheaves at the same time for wear, and check that the belt sits at the correct depth in the groove.
Send the part number C 245, or the profile and length from your old belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 6273.8mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The C profile gives the cross-section: 22 mm top width, 14 mm height and a 40-degree angle. The length is 6273.8 mm. Both must match your drive for the belt to seat and run correctly.
- How do I check that the C 245 is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with this belt. If the drive uses several belts, replace them as a set.
- What should I send to request a quote?
- Send the part number C 245, or the profile and length from your old belt, by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.