V-belt Optibelt C 246
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 246 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 246 and any equivalents.
The Optibelt C 246 VB is a classical V-belt with a C profile and a length of 6350 mm. It measures 22 mm across the top, 14 mm high, and has a 40-degree angle. When you need to match an existing drive, the marking on the back of the old belt is the fastest place to start.
Read the old belt before you remove it. The back typically shows the profile and the length, so a C 246 tells you the profile is C and the length is 246 inches, which corresponds to 6350 mm. Note the full part number and any brand name printed next to it. A photo of the marking is often enough for our team to confirm the replacement or suggest an equivalent.
If the marking is worn or unreadable, measure the top width and height with a caliper. A C profile belt is 22 mm wide across the top and 14 mm high. The 40-degree angle is the standard V shape for this profile. The length is measured around the belt, and the 6350 mm figure gives you a direct reference when comparing to a new belt.
The same size is also listed under Gates C 246. Send the part number from the old belt, along with a photo if possible, by WhatsApp or email. Our team will confirm the Optibelt C 246 VB or point you to the right belt for the drive.
Dimensions
- Section
- C
- Length
- 6350mm
Frequently asked questions
- How do I identify the belt if the marking is faded?
- Measure the top width and height. A C profile belt is 22 mm wide and 14 mm high. The length is 6350 mm. These dimensions match the Optibelt C 246 VB.
- What information should I send for a quote?
- Send the full part number from the back of the old belt, such as C 246. If the marking is unreadable, send the profile, length, and a photo of the belt and the drive.
- Is the same size listed under another brand?
- Yes, the same size is also listed under Gates C 246.