V-belt Gates C 195 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 195 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 195 PowerBand and any equivalents.
The Gates C 195 PowerBand is a banded V-belt from the Hi-Power PowerBand series, built to keep multiple belt strands aligned on drives that cannot tolerate single-belt turnover. Its 4953 mm length and banded construction suit sheaves with several grooves running in parallel. Before you fit a replacement, inspect the drive and sheaves so the new belt starts on a sound system.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which changes the effective diameter and can cause slip or heat. Confirm that all grooves are clean and that the sheaves are aligned to each other. Misalignment is a common cause of edge wear on banded belts, and it will shorten the life of a new C 195 PowerBand just as it did the old one.
Inspect the driven and driver shafts for play, and check bearings for roughness or excessive movement. A loose shaft or failing bearing will pull the banded belt out of line and load the tie band unevenly. Also verify that the take-up adjustment has enough travel to tension the 4953 mm belt correctly. If the drive has been running with a failed belt, look for rubber deposits in the grooves and remove them before installation.
Dimensions
- Length
- 4953mm
Frequently asked questions
- What should I inspect on the drive before installing a Gates C 195 PowerBand?
- Look at sheave groove condition and alignment first, then check shaft play, bearings, and the range of the tensioning adjustment. Correct any misalignment or worn grooves before the new belt goes on.
- How do I request a quote for the C 195 PowerBand?
- Send the part number C 195 PowerBand by WhatsApp or email. Our team replies promptly and can confirm the belt or suggest an equivalent if needed.
- Does the banded construction affect how I tension the belt?
- A banded belt must be tensioned so all strands share the load evenly. Follow the drive manufacturer's tension procedure, and recheck tension after the first run-in period.