V-belt Gates C 200
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 200 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 200 and any equivalents.
The Gates Hi-Power II C 200 is a classical V-belt with a C profile and a length of 5181.6 mm. This belt is built for drives that use C-section sheaves. Before you fit a new belt, inspect the drive and sheaves.
Check sheave grooves for wear, cracks, or embedded debris. Worn grooves can cause a new belt to slip or wear quickly. Verify that the sheaves are aligned and that the belt sits correctly in the groove. The C profile has a top width of 22 mm, a height of 14 mm, and a 40° angle.
Confirm that the drive is stopped and locked out before removing the old belt. Compare the old belt's marking to the part number C 200 to ensure a match. If the old belt is stretched or damaged, measure the drive to confirm the required length. The same size is also listed under Mitsuboshi C 200 and Stark C 200.
Dimensions
- Section
- C
- Length
- 5181.6mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, cracks, or debris. Check alignment and ensure the sheaves are clean. Confirm that the belt sits correctly in the groove.
- How do I identify the correct replacement belt?
- Look for the part number C 200 on the old belt. The Gates Hi-Power II C 200 has a C profile and a length of 5181.6 mm. If the marking is unreadable, measure the drive to confirm the length.
- Can I use a different brand with the same size?
- The same size is also listed under Mitsuboshi C 200 and Stark C 200. Confirm that the profile and length match your drive requirements.