V-belt Gates C 193
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 193 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 193 and any equivalents.
This page covers the Gates Hi-Power II C 193, a classical V-belt with a C profile and a length of 5003.8 mm. The most reliable way to order the correct replacement is to match the belt you are removing: read the marking on the back of the old belt, then confirm the profile and length against the figures here.
The C profile is a classical V-belt cross-section. This belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. The length is 5003.8 mm. If the marking on your old belt reads C 193, this is the same profile and length, and the replacement follows directly.
Inspect the drive before ordering. Check the sheave grooves for wear, confirm the belt sits correctly in the groove, and look for cracks, glazing or exposed cord on the belt being replaced. If a drive runs more than one belt, replacing the full set keeps the load shared evenly across the grooves.
To request a quote, send the part number C 193, the brand Gates and the quantity you need by WhatsApp or email. If the old belt is worn or the marking is unreadable, send the profile and length you measured, or a photo of the belt and the drive, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 5003.8mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. If it shows C 193, the profile and length match this belt. You can also measure the top width, height and outside length and compare them with 22 mm, 14 mm and 5003.8 mm.
- What should I send to get a quote?
- Send the part number C 193, the brand Gates and the quantity. If the belt is unreadable, send the profile and length you measured, or a photo of the belt and the drive.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replacing the full set at once keeps the belts matched in length and shares the load evenly. Order the number of belts the drive uses.