V-belt Gates C 152
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 152 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 152 and any equivalents.
The Gates Hi-Power II C 152 is a classical V-belt with a C profile and a length of 3981.45 mm. This page covers how to match it to the belt you are replacing.
To confirm the C 152 is the correct replacement, read the marking on the back of the belt you are removing. A C profile belt has a top width of 22 mm and a height of 14 mm, with a 40-degree angle, so the old belt should measure the same across the top and around the outside. If the marking is worn or missing, measure the outside length and compare it to the 3981.45 mm length listed here.
The same size is also listed under Stark C 152 and Mitsuboshi C 152. If your drive uses multiple belts, replace them as a set so the load stays evenly distributed across the grooves. Check the sheaves for wear, alignment and debris before installing the new belt, and confirm the belt sits correctly in the groove without bottoming out.
For a quote, send the part number C 152, the quantity, and the drive or equipment it fits. If you are unsure between this belt and another, include the old belt's marking and dimensions, and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3981.45mm
Frequently asked questions
- How do I confirm the C 152 matches my old belt?
- Compare the marking on the back of the old belt to C 152, then check the profile and length. The C profile is 22 mm across the top and 14 mm high, with a 40-degree angle, and the length is 3981.45 mm. If the marking is unreadable, measure the old belt and match those dimensions.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven tension and load distribution. Confirm the sheaves are in good condition and aligned before installing the set.
- What information should I send for a quote?
- Send the part number C 152, the quantity you need, and the equipment or drive it fits. If you have the old belt, include its marking and dimensions so we can confirm the match or suggest an equivalent.