V-belt Gates C 155
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 155 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 155 and any equivalents.
This page covers the Gates Hi-Power II C 155, a classical V-belt with a C profile and a length of 4038.6 mm. The 22 mm top width, 14 mm height and 40° angle identify the cross-section, while the length suits drives that need this specific span. Use these figures to confirm the belt matches your drive before you request a quote.
The profile and length are the two dimensions that decide fit. A C profile belt sits in a C-section pulley groove, and the 22 mm top width and 14 mm height describe the cross-section that must match that groove. The 4038.6 mm length is the datum you compare against the old belt or the drive layout. If the marking on the back of the belt reads C 155, this is the same size.
When you replace a classical V-belt, check the pulleys for wear and alignment, and confirm the belt sits correctly in the groove. If the drive uses multiple belts, replace them as a set so the load stays even. Send the part number, the profile and the length from the old belt, and any photos of the marking, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 4038.6mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The C profile means the belt has a 22 mm top width and 14 mm height with a 40° angle, so it fits C-section pulleys. The 4038.6 mm length is the dimension to match against your drive or the old belt.
- How do I confirm this is the belt on my drive?
- Look for the marking on the back of the belt. If it reads C 155, this is the same size. You can also measure the top width and the length and compare them to the figures on this page.
- What should I send to get a quote?
- Send the part number C 155, the brand and series if you have them, and the profile and length from the old belt. Photos of the marking and the drive help us confirm the right belt or suggest an equivalent.