V-belt Gates C 151
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 151 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 151 and any equivalents.
The Gates Hi-Power II C 151 is a classical V-belt with a C profile and a length of 3937 mm. The profile and length are the two dimensions a buyer needs to match or replace a belt on an existing drive.
Profile C sets the cross-section: the belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. These dimensions determine how the belt seats in the pulley groove. The length of 3937 mm is the datum you compare against the belt currently on the drive.
This belt is also listed under the same size in Stark C 151, Mitsuboshi C 151 and Optibelt C 151. If you are working from a marking on an old belt, note the profile and length first, then the part number. Send that information and we will confirm the C 151 or suggest an equivalent.
For a quote, send the part number C 151, the quantity and any details from the drive. If you are replacing more than one belt on a multi-belt drive, include the full set so we can match all positions.
Dimensions
- Section
- C
- Length
- 3937mm
Frequently asked questions
- What do the profile and length mean on the C 151?
- Profile C gives the cross-section: 22 mm top width, 14 mm height and a 40-degree angle. The length is 3937 mm. Both must match the drive and pulley groove.
- How do I confirm the C 151 is the right belt?
- Check the marking on the back of the old belt for the profile and length, and compare them with the C profile and 3937 mm length. If the marking is unreadable, send photos of the belt and pulley.
- Can I order the same size from another brand?
- Yes. The same size is also listed under Stark C 151, Mitsuboshi C 151 and Optibelt C 151. Send the part number you prefer and we will quote it.