V-belt Gates B 23
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 23 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 23 and any equivalents.
The Gates Hi-Power II B 23 is a classical V-belt with a B profile and a length of 660.4 mm. Before you fit a new belt, it pays to look over the drive and the sheaves it runs on.
Check each sheave for wear, cracks and burrs, and confirm the grooves are clean and free of debris. A worn or damaged groove will not seat the belt correctly, so the replacement will not run as intended. Measure the groove width and inspect the flanges before the belt goes on.
Confirm alignment between the driving and driven sheaves, and check that the shafts and bearings turn freely. Set the correct tension for the drive after fitting, then recheck it once the belt has run in. The belt is 17 mm at the top, 11 mm high and cut at 40 degrees, with a length of 660.4 mm.
The same size is also listed under Mitsuboshi B 23 and Optibelt B 23. Send the part number and the drive details by WhatsApp or email and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 660.4mm
Frequently asked questions
- What should I inspect before fitting this belt?
- Look over the sheaves for wear, cracks and burrs, check the grooves are clean, confirm the sheaves are aligned and make sure the shafts and bearings turn freely.
- What are the dimensions of this belt?
- It is a B profile classical V-belt, 17 mm at the top, 11 mm high, cut at 40 degrees, with a length of 660.4 mm.
- How do I request a quote?
- Send the part number, Gates Hi-Power II B 23, by WhatsApp or email along with your drive details and we will reply promptly.