V-belt Gates AX94
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX94 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX94 and any equivalents.
The Gates Tri-Power AX94 is a cogged classical V-belt in the AX profile, with a length of 2439 mm. Cogged classical belts of this type are commonly used on industrial drives where the belt must flex around smaller pulleys, such as on fans, pumps, compressors and similar equipment. Confirm the profile and length before ordering.
To confirm fit, read the marking on the back of the old belt. The profile should read AX and the length should match 2439 mm. If the belt is worn or the marking is gone, measure the outside length and check the pulley groove width against the AX profile.
The same size is also listed under Dayco AX94, so that reference can help you cross-check what is currently on the drive. When replacing, inspect the pulleys for wear and check that the belt sits correctly in the groove.
For a quote, send the part number AX94, the quantity you need, and the equipment it goes on. If you are unsure of the profile, send a photo of the belt and the pulley.
Dimensions
- Section
- AX
- Length
- 2439mm
Frequently asked questions
- How do I confirm the AX94 is the right belt?
- Check the marking on the back of the old belt. It should show the AX profile and a length of 2439 mm. If the marking is unreadable, measure the outside length and the pulley groove.
- What is the difference between AX and A profile?
- Both are classical V-belt profiles, but the AX profile is cogged, which allows it to flex around smaller pulleys. The AX94 is an AX profile belt with a length of 2439 mm.
- What do I need to send for a quote?
- Send the part number AX94, the quantity, and the equipment it is used on. If you are unsure of the profile, a photo of the belt and pulley helps us confirm.