V-belt Gates AX79

GATES AX79 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX79 and any equivalents.

The Gates Tri-Power AX79 is a cogged classical V-belt in the AX profile with a length of 2058 mm. When a drive goes down, the fastest way to identify the correct replacement is the marking printed on the back of the belt that is coming off. Read that line and match it against this page.

The marking on a belt back is the reference the drive was built around. It gives you the profile and the length in one line, so you can compare it directly with the AX profile and 2058 mm length of the Gates Tri-Power AX79. If the old belt is worn, glazed, cracked or stretched, the marking may still be legible enough to read before you remove it. Write it down as it appears, including any prefix.

Take the marking from the belt, not from a parts list or a photo of the drive. A single character difference changes the profile or the length, and a belt that is close is not the same belt. If the marking is gone, measure the outside length and note the cross-section, then send both along with the drive details.

For a quote, send the part number from the back of the belt, the quantity you need, and the equipment it runs on. If you are replacing more than one belt on the same drive, send every marking on the set so the whole set can be matched at once. The same size is also listed under Dayco AX79.