V-belt Gates AX72
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX72 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX72 and any equivalents.
When a drive belt needs replacing, the most reliable starting point is the marking on the back of the old belt. This page covers the Gates Tri-Power AX72, a cogged classical V-belt with an AX profile and a length of 1880 mm. If that matches the belt you are removing, you can request a quote by part number.
The AX profile identifies a cogged classical V-belt, and the 1880 mm length gives you the dimensional check you need before ordering. Confirm both figures against the old belt's marking rather than relying on a general size description. A clean, readable part number on the back of the belt is the fastest way to avoid a mismatch on the drive.
If the old belt is worn, oily or the marking has rubbed away, measure and note the profile and length before contacting us. The same size is also listed under Dayco AX72, which may help you cross-check what you find. Send the part number, the profile and the length, and our team can help confirm the right belt or suggest an equivalent.
Cogged classical V-belts like the AX72 are used across industrial drives where the original belt marking is the primary reference. A quick inspection of the sheaves, pulley alignment and belt tension at the same time can prevent a repeat failure. For quotes, email or message us on WhatsApp with the full marking and the quantity you need.
Dimensions
- Section
- AX
- Length
- 1880mm
Frequently asked questions
- How do I identify the right replacement belt?
- Read the marking on the back of the old belt. For this Gates Tri-Power belt, the part number is AX72, the profile is AX and the length is 1880 mm. Confirm all three against your old belt before requesting a quote.
- What should I send for a quote?
- Send the part number AX72, the profile AX and the length 1880 mm, along with the quantity you need. If the marking is difficult to read, note any remaining characters and the drive details, and our team can help confirm the right belt.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Dayco AX72. You can use that as a cross-check when comparing the marking on your old belt.