V-belt Dayco AX72
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX72 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX72 and any equivalents.
The Dayco AX72 is a cogged classical V-belt in the AX profile, 1879.6 mm long. Before you fit it, inspect the drive so the new belt runs true and lasts. We supply this belt to maintenance and purchasing teams across the US, Canada, Mexico and South America.
Start with the sheaves. Look for worn grooves, cracks, burrs or a polished floor that lets the belt sit too deep. Check each sheave for alignment with a straightedge or laser, and confirm the shafts are parallel. A misaligned or worn drive will destroy a new belt quickly, no matter how good the belt is.
Confirm the old belt marking matches AX72 and that the length is 1879.6 mm. If the old belt is stretched, glazed or has missing cogs, replace it. On multi-belt drives, fit a full set of matched belts so load is shared evenly. Clean the grooves, check the tensioner, and set tension to the drive maker's specification.
The same size is also listed under Gates AX72. To request a quote, send the part number, the quantity and the drive details by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1879.6mm
Frequently asked questions
- What should I check on the drive before fitting a Dayco AX72?
- Inspect sheave grooves for wear, cracks and burrs, verify sheave alignment and shaft parallelism, and check the tensioner and bearings. Correct any issues before installing the belt.
- Can I replace just one belt on a multi-belt drive?
- On drives with multiple belts, fit a full set so the load is shared evenly. Mixing a new belt with worn belts can overload the new one.
- What do I need to send to get a quote for the AX72?
- Send the part number AX72, the quantity you need, and any drive details by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.