V-belt Gates A 106
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES A 106 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 106 and any equivalents.
The Gates Hi-Power II A 106 is a classical V-belt with an A profile and a length of 2743.2 mm. If you are replacing a belt on an existing drive, this page gives you the details needed to confirm it matches before you order.
Start with the belt you are removing. Check the marking on the back for the profile and the part number. This belt is profile A with a top width of 13 mm and a height of 8 mm, and the included angle is 40 degrees. The length is 2743.2 mm. Compare those figures with the old belt; if the profile and length agree, the A 106 is the correct size.
The same size is also listed under Mitsuboshi A 106 and Stark A 106, so you can recognize it across those brands. For a quote, send the part number A 106 along with the quantity you need. If you are unsure, send a photo of the marking on the old belt and the drive sheave dimensions, and our team can help confirm the right belt or suggest an equivalent.
On a drive with multiple belts, replace the full set at the same time so the load stays even across the grooves. Inspect the sheaves for wear, rust or debris, and check the tension after installation according to your equipment manual.
Dimensions
- Section
- A
- Length
- 2743.2mm
Frequently asked questions
- How do I confirm the A 106 matches the belt I am replacing?
- Read the marking on the back of the old belt. This belt has an A profile, a top width of 13 mm, a height of 8 mm, a 40-degree angle and a length of 2743.2 mm. If those match, the A 106 is the correct size.
- Can I use the same size from another brand?
- The same size is also listed under Mitsuboshi A 106 and Stark A 106. Send us the part number you prefer and we can quote it.
- What should I send for a quote?
- Send the part number A 106 and the quantity. If you are unsure of the size, include a photo of the marking on the old belt and the drive sheave dimensions.