V-belt Stark A 106
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 106 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 106 and any equivalents.
The Stark A 106 is a classical V-belt with an A profile. Its 13 mm top width, 8 mm height and 40° angle identify the cross-section, while the part number identifies the belt's length. Use these dimensions to match an existing belt or confirm a replacement before you request a quote.
The A profile is a classical V-belt cross-section, not a narrow wedge belt. The 13 mm top width and 8 mm height are the two dimensions that must match the pulley groove for the belt to seat correctly. The 40° angle is the included angle of the V, so it is another point to check when you compare the old belt to the replacement.
The same size is also listed under Mitsuboshi A 106 and Gates A 106. If your drive uses one of those part numbers, the Stark A 106 is the same size. For a quote, send the part number A 106 and the quantity you need. If you are unsure whether the A profile is correct, include a photo of the belt back and a measurement of the top width.
Classical V-belts are commonly replaced as a set when a drive uses multiple belts. If your application has more than one belt per drive, order the full set so the belts wear evenly. The Stark A 106 is supplied by MR Industrial Accessories LLC to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
Dimensions
- Section
- A
Frequently asked questions
- What do the A and 106 mean on this belt?
- A is the profile, which sets the cross-section: 13 mm top width, 8 mm height and a 40° angle. 106 is the part number that identifies the belt length. Use both when comparing against the marking on your old belt.
- Can I use this belt if my current belt is marked Mitsuboshi A 106 or Gates A 106?
- Yes. The same size is also listed under Mitsuboshi A 106 and Gates A 106, so the Stark A 106 is the same size. Confirm the profile and length marking on your old belt before ordering.
- What should I send to request a quote?
- Send the part number A 106 and the quantity. If you are replacing a set, include the number of belts on the drive. A photo of the belt back and a top-width measurement help confirm the A profile.