V-belt Gates A 101
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES A 101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 101 and any equivalents.
The Gates Hi-Power II A 101 is a classical V-belt with an A profile and a length of 2616.2 mm. Before you fit it, check the drive and sheaves so the new belt runs true from the start.
Inspect sheave grooves for wear, rust, and buildup. Worn grooves let the belt sit too deep, which reduces grip and shortens belt life. Check that sheaves are aligned and tight on their shafts, and that no groove has a step or ridge that will cut into the belt.
Confirm the belt marking on the old part matches what you need. The A 101 carries a 13 mm top width, 8 mm height, and 40 degree angle. The same size is also listed under Stark A 101, Mitsuboshi A 101, and Optibelt A 101.
After fitting, recheck tension and alignment once the drive has run under load. Send the part number and any photos of the old belt or sheaves by WhatsApp or email, and the team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2616.2mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, and buildup, verify alignment, and make sure sheaves are secure on their shafts. Correct the drive first so the new belt seats and wears evenly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with the A 101. This belt has an A profile and a length of 2616.2 mm, with a 13 mm top width, 8 mm height, and 40 degree angle.
- What information should I send for a quote?
- Send the part number, A 101, along with photos of the old belt marking and the sheaves if you have them. The team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.