DODGE P2B-SCMU-100 pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCMU-100 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCMU-100 and any equivalents.
The DODGE SCMU series pillow block with insert bearing is a ready-to-install mounted unit for supporting rotating shafts in industrial equipment. It pairs a cast iron housing with a sealed insert ball bearing, factory lubricated and aligned. MR supplies this line with technical support to help you select the right configuration for your application.
The SCMU code structure identifies the housing type, size, and insert series. The letter P indicates a pillow block, the following number specifies the housing size, and SCMU designates the insert bearing family with its sealing and locking method. For instance, P2B-SCMU-100 denotes a size 2 pillow block with an SCMU insert for a 1-inch shaft. Understanding this pattern allows you to order an exact replacement or the correct variant for your machinery.
These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, screens, and other process equipment across industries such as food, chemical, cement, and aggregate. The cast iron housing and sealed insert provide reliable performance in environments with dust, moisture, or frequent washdowns. When selecting, consider shaft diameter, load type (radial, axial, or combined), and environmental conditions. The insert seal—labyrinth or lip—determines protection against contaminants; choose based on dust, water, or washdown exposure. Mounting requires a flat, rigid base, proper alignment, and correct tightening of set screws or locking collar. Periodic greasing through the insert's fitting, if present, supplements factory lubrication.
Pillow blocks with insert bearings are interchangeable between brands by shaft size, housing type, and insert configuration, though suffixes may differ. To replace an existing unit, provide the complete code and shaft dimensions. MR can identify a compatible alternative and advise on sealing, locking, and lubrication to maximize service life.
Dimensions
- Número de producto
- 064249
Frequently asked questions
- What does the designation P2B-SCMU-100 mean?
- P indicates pillow block, 2 is the housing size, SCMU is the insert bearing series, and 100 refers to the 1-inch shaft diameter. With that code, we can quote the exact unit or an equivalent.
- How do I choose the seal for a dusty or wet environment?
- The insert seal defines protection: for fine dust or dry environments, a labyrinth may suffice; for washdowns or moisture, a lip seal with tighter contact is advisable. Share your plant conditions and we will recommend the right configuration.
- What do I need to replace an existing mounted unit?
- Ideally the complete code stamped on the housing or insert, plus the shaft diameter and a photo of the mounting. With that data, we will quote the DODGE SCMU series unit that best fits.