DODGE P2B-SCMU-25M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCMU-25M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCMU-25M and any equivalents.
The DODGE SCMU series pillow block with insert bearing is a mounted unit that pairs a cast iron housing with a pre-lubricated, sealed insert ball bearing. It supports rotating shafts in power transmission and conveying equipment where rigidity, alignment and protection from contaminants are important. MR Industrial Accessories supplies this Dodge line to plants and workshops across the United States and in several Latin American countries.
Reading the part number helps you order the complete unit. In P2B-SCMU-25M, the P stands for pillow block, the 2 indicates the housing series, SCMU identifies the mounted unit with insert bearing, and 25M gives the shaft diameter in millimeters. With that code you receive housing, insert, seals and lubrication together.
These units are common in belt conveyors, bucket elevators, mixers, mills, screens and packaging lines. They suit food, cement, mining, paper and aggregate processing plants, where dust, humidity or frequent washdowns are present. The cast housing and insert sealing handle these conditions better than a conventional split housing.
Selection depends on shaft diameter, expected radial and axial loads, and the sealing needed for the environment. The insert arrives lubricated from the factory; in service, check the grease and internal clearance. Mount on a flat base, tighten the anchor bolts and align the shaft with the drive equipment. Misalignment accelerates wear on the seal and insert.
Dodge mounted units interchange with other brands of pillow blocks and insert bearings that share the same diameter and locking configuration. Match the housing series, shaft diameter and insert locking type. To replace an existing unit, send the part number stamped on the housing or the shaft dimensions and we will identify a compatible alternative.
MR Industrial Accessories supplies the Dodge line. If your equipment needs a pillow block with insert bearing, send the part number by WhatsApp or email and we will quote it promptly. We can also advise on the right sealing and lubrication for your application.
Dimensions
- Bore
- 25 mm
Frequently asked questions
- What does SCMU mean in a DODGE pillow block?
- SCMU identifies the mounted unit with insert bearing in the Dodge ball bearing pillow block catalog. The P indicates pillow block, the following number defines the housing size, and the final suffix shows the shaft diameter, such as 25M for 25 mm.
- How do I choose the right pillow block for my shaft?
- You need the shaft diameter, the radial and axial load of the equipment, and the environment. These define the housing size and insert sealing. If you have the old part number, send it by WhatsApp or email and we will quote the equivalent.
- Can it be replaced by another brand?
- Yes, mounted units interchange between brands when shaft diameter, locking configuration and housing dimensions match. With the original part number or shaft dimensions, we will indicate a compatible alternative.