DODGE P2B-SCMU-100-NL pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCMU-100-NL belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCMU-100-NL and any equivalents.
The SCMU series pillow block is a mounted unit in the DODGE insert bearing line. It consists of a cast housing with a flat base that holds a sealed, pre-lubricated insert ball bearing, ready to be bolted to a structure. It supports transmission shafts where rigid mounting and straightforward alignment are needed, and it is common in conveying, milling and other industrial processes.
The code on these units breaks down into parts: the letter P stands for pillow block, the number after it gives the housing size, and SCMU identifies the insert series and its sealing arrangement. An NL suffix means the mounting variant with an eccentric collar. For example, P2B-SCMU-100-NL combines housing, insert and shaft diameter in one designation.
Typical applications include belt conveyors, bucket elevators, mixers, screens, centrifugal pumps and packaging lines. In food and beverage plants, the insert seal helps keep out dust and moisture. In mining and cement operations, they suit moderate loads and continuously rotating shafts. The flat base can be mounted on profiles, sheet metal beds or concrete with leveling shims.
When selecting a unit, consider shaft diameter, expected radial and axial load, and the sealing needed for the environment—whether dust, water or frequent washdowns. During installation, set the base on a clean, flat surface, tighten the bolts without distorting the housing, and verify shaft alignment before start-up. The unit comes lubricated; for relubrication, use a grease compatible with the insert and check the eccentric collar to ensure proper shaft grip.
Mounted units are often interchangeable between manufacturers by shaft diameter and housing type, but center height, fixing hole spacing and locking system may differ. Before swapping one unit for another brand, compare those three dimensions and the load rating. We can suggest a compatible alternative for your equipment.
If you have the unit code, send it via WhatsApp along with the shaft diameter and a photo of the mounting. If you need an SCMU series variant not listed, contact us with the model or dimensions and we will provide the corresponding option.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SCMU mean in a pillow block?
- SCMU identifies the insert bearing series and its sealing configuration in the DODGE mounted unit line. The P and the following number define the housing type and size, while the NL suffix indicates the shaft locking variant.
- How do I choose the correct shaft diameter?
- Measure the shaft in the support area with a caliper and compare it to the unit designation. If the shaft is worn, consider an alternative with a collar or bushing that compensates for play. Send the measurement via WhatsApp and we will quote the corresponding unit.
- Can it be replaced by a unit from another brand?
- In many cases yes, but you must compare center height, fixing hole spacing and the insert locking system. With those dimensions defined, we can tell you the compatible alternative.