DODGE AN-GT-04-012-D pillow block bearing

DODGE AN-GT-04-012-D belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AN-GT-04-012-D and any equivalents.

The DODGE GT series Y-bearing pillow block is a foot-mounted unit that arrives ready to bolt down: the cast housing and the insert ball bearing are already put together at the factory, and set screws hold the insert on the shaft. It supports rotating shafts on conveyors, fans, belt drives and process machinery where two-hole fixing and straightforward alignment are what the application calls for.

Reading the GT code helps you order the right piece. The AN-GT prefix marks the insert-bearing pillow block family; the digits after it give the housing size, and the trailing suffix tells you which seal or configuration variant you have. The full part number is what identifies the unit, so keep it complete rather than working from the housing size alone.

You will find these units in food and beverage operations, water treatment works, cement plants, sugar mills and agro-industrial sites. Typical duties include belt and chain conveyors, bucket elevators, mixers, blowers and packaging lines. Because the housing and bearing come as one assembly, installation is simpler than building up separate components, and the insert tolerates the small misalignments that come with welded frames or sheet metal structures.

Selection starts with shaft diameter and load direction: mostly radial on horizontal conveyors, with some axial thrust on inclined shafts. Match the sealing to the surroundings, since dust, washdown water or fine chips call for labyrinths or seals that are still in good shape. When mounting, set the pillow block on a flat, rigid base, tighten the fixing bolts without distorting the housing, and turn the shaft by hand before startup. The insert is greased at the factory, and later regreasing goes in through the housing channel.

Interchangeability needs care. Insert-bearing pillow blocks are sold by several brands under their own designations, and shaft diameter by itself does not define an equivalent. You also have to compare bolt hole spacing, height to center, how the insert is fastened and the sealing arrangement. If you are switching from another make, send the old part number along with the main dimensions, and we will point you to the matching DODGE option or the alternative that fits your equipment.

For a Y-bearing pillow block replacement, message us on WhatsApp with the complete part number. Quotes go out promptly, and if the variant you need is not one you can see, we can work from the part number or model you already have. We can also help with mounting and lubrication questions so the unit sits aligned and performs as it should.