DODGE AN-GT-03-17M-D flange bearing 3 holes

DODGE AN-GT-03-17M-D belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AN-GT-03-17M-D and any equivalents.

This 3-bolt flange mounted unit combines the AN-GT housing with a DODGE insert bearing from the GT series. It holds rotating shafts in place where the mounting has to stay firm and take up little room, while the insert itself handles small alignment errors. Machines running under moderate load benefit from the simple installation, the lubrication already built into the insert and the shielding against dirt and moisture.

Reading the code helps you order the right unit. The letters AN point to the flange housing family, GT marks the insert bearing series, and the digits that follow give the shaft size. The trailing letters M and D indicate how the unit is sealed and how the housing is configured. Take AN-GT-03-17M-D as an example: size 03, a 17 mm insert and an M-type closure. Quote the complete designation exactly as it appears on your equipment.

You will find these units on conveyors, mixers, fans, pumps, belt drives and other process machinery, in food plants, cement works, paper mills, cold rooms and repair shops. Three bolts through the flange hold the housing steady on sheet metal or cast iron without any machining work, and because the insert is self-aligning, minor shaft misalignment does not become a problem.

Selection comes down to shaft diameter, the load involved, rotation speed and the surrounding conditions. The M seal keeps dust and moisture out; where washdowns happen often, extra protection is worth considering. When fitting the unit, seat the flange on a flat surface, tighten the bolts in a cross pattern and confirm the insert can still move to align itself. Follow the duty cycle for relubrication and check clearance and shaft grip at regular intervals.

Housings for insert bearings can be swapped between brands when the shaft number, hole count and fastening style match. Other mounted bearing lines offer equivalents to the DODGE GT series, though flange dimensions and the locking method are not always the same. MR Industrial Accessories LLC can point you to a compatible option or make the part to order.

Send the part number AN-GT-03-17M-D, or whatever designation is stamped on your machine, through WhatsApp or email. A photo of the housing together with the shaft measurement also works if the number is not readable. The team answers quickly and helps you settle on the right choice for the application.