DODGE AN-GT-03-010-D flange bearing 3 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- GT
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE AN-GT-03-010-D belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AN-GT-03-010-D and any equivalents.
A three-bolt flange bearing unit, the AN-GT pairs a housing with a DODGE GT series insert bearing. The insert arrives already fitted and aligned, so the unit bolts to a flat surface and supports a rotating shaft. Plants choose this arrangement when they want a compact support that is straightforward to swap out.
Reading the code helps you order the right piece. AN stands for the housing style, GT identifies the insert bearing series, the digits in the middle give the shaft diameter, and the closing D marks the mounting variant. So AN-GT-03-010-D is a three-bolt flange housing with a GT insert bearing sized for a 10 mm shaft. With that full reference you can request the exact replacement or ask about equivalent sizes.
You will find these units on conveyors, mixers, blowers, centrifugal pumps and other process equipment in food, chemical and aggregate plants. The three-bolt flange bolts firmly to sheet metal or a steel structure, which makes installation simple and removal quick. The GT series takes inserts with different seal types, so pick the seal that suits dusty, wet or washdown conditions.
Selection comes down to shaft diameter, the load case (radial, axial or combined) and the surrounding environment. Before mounting, confirm the support surface is clean and flat, then tighten the bolts in a cross pattern and verify shaft alignment with the bearing. Regular lubrication and periodic re-tightening of the bolts help the unit last.
Housings from different brands can be swapped when flange dimensions, shaft diameter and insert locking method all line up. A similar series name is not enough; compare drawings or actual measurements. Send us the original part number or the dimensions of the housing you are replacing, and we will identify the compatible option.
To get a quote, message us on WhatsApp or by email with the complete AN-GT part number or your machine model. We reply promptly and can suggest equivalents or help you choose the right variant.
Dimensions
- Número de producto
- 136521
- Bore
- 5/8 in
Frequently asked questions
- What does the part number AN-GT-03-010-D tell me?
- It identifies a three-bolt flange housing with a GT series insert bearing. The middle digits give the shaft diameter and the final D shows the mounting variant. Send the complete number so we can quote the exact reference.
- How can I check whether this housing replaces the one on my machine?
- Compare the shaft diameter, the flange hole spacing and the insert locking type. A photo or the dimensions of the original housing is enough for us to confirm whether the AN-GT fits or to point you to the alternative.
- What maintenance does this housing need?
- Check flange bolt tightness, shaft alignment and seal condition at regular intervals. If the insert has a grease fitting, lubricate it to suit the working conditions. Noise or excessive play usually means the insert bearing should be replaced.