DBH 9804 radial shaft seal — 52 x 70 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9804 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9804 and any equivalents.
The DBH 9804 is a radial shaft seal built to hold lubricant in place and keep dust and water out of rotating assemblies. Its three key measurements are 52.00 mm for the shaft, 70.00 mm for the housing bore and 10.00 mm for the height. You will find it in gearboxes, pumps and electric motors. MR Industrial Accessories supplies this brand and can help you match the seal to your equipment.
This seal belongs to the DBH line and carries part number 9804. The Mx design means a metal outer body with one sealing lip, a configuration intended to retain grease or oil and block contaminants while the shaft turns. Because the lip rides against the shaft, the seal wears over time and is normally swapped out once lubricant starts escaping or dirt works its way in.
Common installations include gearboxes, centrifugal pumps, electric motors, reducers and transmission equipment. The seal presses into the housing bore and runs against the rotating shaft, which keeps the bearings lubricated and protected. You will also see it in agricultural machinery, process equipment and conveyor systems, where a failed seal can mean contamination or lubricant loss.
Before fitting a replacement, confirm the shaft diameter, housing bore and height match the original. Clean the shaft and bore, remove burrs and scratches, and lubricate the lip before pressing the seal in squarely, without hammer blows that could distort the body. If the shaft surface is worn, a different size or a repair sleeve may be the better route.
To source an equivalent, send part number 9804 or the dimensions 52 x 70 x 10 mm to MR Industrial Accessories. You can also share the equipment make, model and original part number, and the team will look for a suitable option and advise on what is available.
Quotes are handled by WhatsApp or email. If you are unsure about the application, attach a photo of the used seal or the housing bore and the team will help you confirm the size before you order.
Dimensions
- Shaft (d)
- 52mm
- Housing bore (D)
- 70mm
- Height (h)
- 10.00mm
- Design
- Mx
Frequently asked questions
- How do I ask for a seal equivalent to the DBH 9804?
- Send part number 9804 or the dimensions 52 x 70 x 10 mm by WhatsApp or email to MR Industrial Accessories. A photo of the old seal or the housing bore helps the team confirm the match and suggest a suitable alternative.
- What does the Mx design refer to on this seal?
- Mx describes a radial shaft seal with a single sealing lip and a metal body, made to retain lubricant and exclude dust on rotating shafts. It is a common industrial configuration. If your equipment calls for a different geometry, ask the team about the options they can supply.
- What are the dimensions of the DBH 9804 seal?
- Shaft 52.00 mm, housing 70.00 mm, height 10.00 mm, in the Mx design of the DBH line. Measure the equipment before replacing to be sure the size is right.