DBH 9806 radial shaft seal — 32 x 54 x 6.5

DBH 9806 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9806 and any equivalents.

The DBH 9806 is a single-lip radial shaft seal built to hold lubricant in place and keep dust, water and particles out of rotating assemblies. Its A 306 configuration pairs a sealing lip with a metal case that presses into the housing. Pumps, motors, gearboxes and power transmission units are the usual homes for this seal, wherever a shaft turns continuously and the barrier has to hold up.

Read the code by its measurements: shaft 32 mm, housing 54 mm, height 6.50 mm. The A 306 designation tells you this is a radial shaft seal with a lip and a metal case, made to be press-fit into the housing bore. Within the DBH line, 9806 pins down the size, which makes cross-referencing straightforward when a worn seal has to be matched against another brand.

You will find seals in this size range on centrifugal pumps, electric motors, gearboxes, transmission shafts and process equipment. The job is the same everywhere: retain oil or grease inside the assembly and block contamination from the outside. Gearboxes and bearing housings often use them as a secondary seal as well.

Before ordering, confirm that the shaft, housing and height figures line up with the part you are replacing. The shaft surface should be polished and free of burrs, and the housing clean and undistorted. Lubricate the lip at installation and slide it on with a guide sleeve so the lip is not damaged. Where the shaft itself shows wear, a seal with an additional lip is worth considering.

To get a quote for code 9806, send the shaft, housing and height measurements. A photo of the old part or the assembly drawing works too. With that information we can search the DBH line for the alternative or propose a compatible option. The exact reference is not required; the measurements are enough to start the search.

MR Industrial Accessories LLC supplies this DBH oil seal as one of the brands it carries. For a quote or to ask about another size, message us on WhatsApp with code 9806 or the measurements from your equipment, and we will come back with the option that fits your application.