DBH 9584 radial shaft seal — 31.75 x 50.27 x 10.31

DBH 9584 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9584 and any equivalents.

The DBH 9584 is a radial lip seal designed to fit into a housing and seal against a rotating shaft, keeping lubricant in and contaminants out. With a shaft diameter of 31.75 mm, housing bore of 50.27 mm, and overall width of 10.31 mm, and conforming to design A 246, it suits applications where axial space is tight and dependable sealing is required in continuous operation.

This seal belongs to the DBH line and carries the code 9584. Its key dimensions are shaft 31.75 mm, housing 50.27 mm, and width 10.31 mm, and it follows design A 246. As a radial lip seal, it presses into the housing cavity and its flexible lip rides against the shaft to retain oil or grease and block dust, water, or particles from entering.

Typical installations include gearboxes, pumps, electric motors, conveyor rollers, mixers, and other power transmission equipment. It also shows up in agricultural machinery, packaging lines, and pumping systems where a shaft turns inside a housing and the lubricant must be kept separate from the environment. Because it is a wear part, a hardened, cut, or stiff lip will eventually lead to lubricant loss or contaminant ingress.

During installation, verify that the shaft surface is free of burrs or deep grooves in the contact zone and that the housing is clean and undistorted. Apply lubricant to the lip before pressing it in, and use a flat driver to avoid twisting. Seal selection depends on shaft speed, operating temperature, and the lubricant used; in high-vibration or dusty conditions, it is worth reviewing the lip design and seal material.

To request a quote for an equivalent, provide the code 9584 or the shaft, housing, and width dimensions. With that information, we can search for alternatives within the same family or from other brands we supply. We can also advise if the original seal has a special design or if the housing can accept a different width.

MR Industrial Accessories supplies the DBH brand as part of its seals and shaft seals range. To request a quote for this seal, send the code 9584 via WhatsApp or email and we will respond promptly with the information you need.