DBH 9582 radial shaft seal — 30 x 63.2 x 17

DBH 9582 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9582 and any equivalents.

The DBH 9582 is a radial shaft seal that keeps lubricant in and contaminants out of gearboxes, pumps, motors and similar equipment. It fits a 30 mm shaft, a 63.20 mm housing bore and a 17 mm axial space, and it carries the A 134 design. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your machine.

The code has two parts: 9582 is the item number, and A 134 describes the seal design. For fit, you need three measurements: shaft 30 mm, housing 63.20 mm, and overall height 17 mm. The outer case presses into the housing while the lip rides on the rotating shaft, separating the lubricated side from the outside.

Seals in this size range show up in gear reducers, centrifugal pumps, electric motors, line shafts and process equipment. The job is always the same: hold oil or grease in place and keep dust, water and particles away from bearings and gears. It suits shafts turning at moderate speed where the lip material can handle the operating temperature.

Before installation, compare the shaft and bore to the figures above, inspect the shaft for nicks or wear in the lip path, and coat the lip with lubricant. The 17 mm height tells you how much axial room the seat offers, so keep that dimension in mind. If the shaft is worn, setting the seal slightly deeper or shallower can move the lip to fresh metal.

When you need an alternative, send the 9582 code plus your shaft, housing and height measurements and the equipment make. With that we can cross to a different brand or series that does the same job, or propose a design variant if the mounting space allows. Unusual tolerances on the shaft or bore are also worth flagging so we can advise accordingly.

MR Industrial Accessories carries the DBH line within its seals and oil seals range. To request a quote on this code, message us on WhatsApp with 9582 and your equipment dimensions, and we will come back with the option that fits your application.