DBH 9532Pol radial shaft seal — 50.6 x 71.4 x 14
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9532Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9532Pol and any equivalents.
The DBH 9532Pol is a radial shaft seal that keeps lubricant in and contaminants out of rotating assemblies. With a 50.60 mm shaft, 71.40 mm housing and 14.00 mm width, it fits equipment where the mounting envelope is tight. MR Industrial Accessories LLC supplies this brand and helps you match the seal to your application.
The 9532Pol belongs to the DBH line and carries the Mz designation, a single-lip design with a spring that holds oil or grease on a rotating shaft. Read the code as the manufacturer's own reference, not as an inch size or a number from another seal family. Confirm the three dimensions before ordering: shaft 50.60 mm, housing 71.40 mm, width 14.00 mm.
Seals in this size range show up in gear reducers, centrifugal pumps, electric motors, line shafts and other continuously running machinery. Their job is to hold the lubricant inside the housing and to block dust, water and particles that would otherwise reach the bearings. Treat it as a wear item and replace it once leakage or unusual noise appears near the seal seat.
Before pressing the new seal in, clean the shaft and bore and remove burrs or scratches. Coat the lip with the same oil or grease used in the unit, then seat it squarely and evenly until it is flush with the housing. Keep metal tools away from the lip. If the shaft surface is worn, a seal with a taller lip can help compensate for the clearance.
For an equivalent, send the code 9532Pol along with the shaft, housing and width measurements taken from your equipment. A photo of the removed seal or the assembly drawing also works. Our team checks that information against the options from DBH and other lines we carry and points you to the closest fit.
To request a quote, message us on WhatsApp or by email with the full code. If the Mz designation or the numbering is unclear, our technical staff can walk you through the manufacturer's data.
Dimensions
- Shaft (d)
- 50.6mm
- Housing bore (D)
- 71.4mm
- Height (h)
- 14.00mm
- Design
- Mz
Frequently asked questions
- What are the dimensions of the DBH 9532Pol seal?
- Shaft 50.60 mm, housing 71.40 mm and width 14.00 mm. These are the manufacturer's figures, so verify them on your equipment before requesting a quote.
- How do I ask for an equivalent to the 9532Pol?
- Send the code 9532Pol plus the shaft, housing and width dimensions through WhatsApp or email. With that data we review the lines we supply and confirm a compatible option.
- What does the Mz design mean on this seal?
- Mz indicates a construction configuration defined by the manufacturer. To judge whether it suits your case, send us the code together with the lubricant type, speed and temperature.