DBH 9531Sil radial shaft seal — 34.5 x 59.2 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9531Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9531Sil and any equivalents.
The DBH 9531Sil is a radial shaft seal that keeps oil or grease contained where a rotating shaft passes through a housing. Its Lx design pairs a sealing lip with a metal outer body that presses into the bore. You will find it in gearboxes, pumps, electric motors and other power transmission equipment, where it protects bearings and stops leaks. MR Industrial Accessories supplies this brand and helps you confirm the right size.
The seal fits a shaft of 34.50 mm, a housing bore of 59.20 mm and a width of 12.70 mm. The Lx configuration means a lip seal with an outer metal reinforcement, built to hold lubricant in and keep contaminants out on rotating shafts. Within the DBH line, the 9531Sil code identifies both the size and the construction type. It works as a direct replacement in equipment that already uses this standard size.
Common installations include gearboxes, centrifugal pumps, electric motors, compressors and belt or chain drives. In each case the seal stops oil from escaping and blocks dust or water from reaching the bearing, which helps extend bearing service life. You will also see it in agricultural, road and process equipment where shafts turn continuously and lubrication must stay contained.
Before fitting, inspect the shaft for burrs or wear and make sure the housing is clean and undistorted. Apply the same grease or oil used in the equipment to the lip, then seat the seal with a support tube that presses on the outer diameter, never on the lip. If the shaft shows a worn track, a repair sleeve is an option. Speed, temperature and fluid type all affect selection.
For an equivalent, send the part number 9531Sil or the shaft, housing and width measurements. A photo of the old part or the equipment drawing also works. With that information we can quote and suggest compatible alternatives.
MR Industrial Accessories supplies the DBH brand. Message us on WhatsApp or email with the part number 9531Sil and we will reply with a quote and replacement options. If the seal sits on critical equipment, ask about installation and the right tools to avoid damaging the lip during fitting.
Dimensions
- Shaft (d)
- 34.5mm
- Housing bore (D)
- 59.2mm
- Height (h)
- 12.70mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9531Sil oil seal?
- Shaft 34.50 mm, housing 59.20 mm, width 12.70 mm. These match the 9531Sil designation and should be verified before ordering.
- What type of equipment is this oil seal for?
- It is used in gearboxes, pumps, electric motors, compressors and transmissions. Its role is to retain lubricant and exclude dust or water where the shaft rotates inside the housing. It is a standard replacement for equipment that already uses this size.
- How do I request a quote or an equivalent?
- Send the part number 9531Sil by WhatsApp or email along with the shaft, housing and width measurements. If you don't have them, send a photo of the old part or the equipment drawing. With that data we will quote and offer compatible alternatives within the DBH line.