DBH 9487Vit radial shaft seal — 11.9 x 24 x 6

DBH 9487Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9487Vit and any equivalents.

For maintenance teams working on rotating equipment, the DBH 9487Vit radial shaft seal keeps lubricant where it belongs and keeps contaminants out. It fits a 11.90 mm shaft, a 24.00 mm housing and has a 6.00 mm height. The Lx-R-H designation tells you how the lip and case are arranged. This is a wear part: once the lip hardens or shows marks, oil loss starts and replacement is due.

Part number 9487Vit belongs to the DBH seal line. The size code follows the Lx-R-H pattern: shaft 11.90 mm, housing 24.00 mm, height 6.00 mm. The lip rides on the rotating shaft while the outer diameter presses into the housing bore. The 6.00 mm height is the width of the housing where the seal seats.

You will find this seal in gearboxes, centrifugal pumps, electric motors, mixers, conveyor belts and machine tools. It also suits dusty or wet environments where the lip must block particles and moisture. Before selecting the lip compound, check the operating temperature and the lubricant in use.

Installation calls for a clean shaft with no burrs or scratches, and a housing free of dents. Lubricate the lip, then drive the seal in with a tool that contacts only the outer edge. Shaft speed, pressure and fluid type all affect how long the seal lasts. If the original has a different design, look for an equivalent that matches the shaft, housing and height.

To order a replacement, send part number 9487Vit or the dimensions 11.90 x 24.00 x 6.00 mm on WhatsApp. Include the equipment, the original seal brand and a photo of the housing if you have them. MR Industrial Accessories supplies DBH within its seals and shaft seals range, and can evaluate an equivalent from another line.