DBH 9488/85 radial shaft seal — 23 x 34 x 6.5

DBH 9488/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9488/85 and any equivalents.

The DBH 9488/85 is a radial shaft seal that sits in a fixed housing and rides against a rotating shaft, keeping lubricant in and dirt, water and particles out. Its small envelope suits assemblies where axial room is tight and speeds stay moderate. MR Industrial Accessories supplies this brand and helps you match the seal to the job.

The designation 9488/85 identifies a DBH seal built to design A 219, a single lip with a spring for lubricated rotating shafts. Shaft 23.00 mm, housing bore 34.00 mm, height 6.50 mm. The elastomer lip and the internal spring hold contact on the shaft, while the outside diameter locks into the bore. It is a standard replacement item in the seals and oil seals range.

A seal this size turns up in small gearboxes, electric motors, centrifugal pumps, gear reducers and power transmission equipment, as well as machine tools, washing equipment and irrigation systems. In every case it separates the lubricated side from the outside environment, running on a rotating shaft inside a stationary housing.

Before ordering, confirm shaft size and surface finish and check for burrs or marks that could cut the lip. The bore should be clean and undistorted. Lubricate the lip with the service oil or grease, then press on the outer diameter with a proper driver rather than on the lip. Where the shaft is worn, an offset lip may be the better option, and lip material should follow the working speed and temperature.

For an equivalent, send code 9488/85 or the dimensions 23 x 34 x 6.50 mm through WhatsApp. A photo of the part and caliper readings also help. We compare your request against the manufacturer's data sheet to confirm alternatives in the same series or from other brands we supply. More detail means a faster answer.

To get a quote on the DBH 9488/85, message us on WhatsApp with the code and the quantity you need. We will come back with the quote and any alternatives. MR Industrial Accessories works with brands, so ask about other sizes in the seals and oil seals line as well.