DBH 9485Pol radial shaft seal — 58 x 75 x 15.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9485Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9485Pol and any equivalents.
The DBH 9485Pol is a radial shaft seal built for rotating shafts. It measures 58 mm at the shaft, 75 mm at the housing bore, and 15.50 mm in height, with an A 324 design. This lip seal keeps lubricant in and contaminants out of gearboxes, pumps, and other industrial equipment.
The code 9485Pol identifies a DBH seal with a specific lip and metal case arrangement, the A 324 design. When selecting a replacement, confirm three dimensions: shaft diameter (d) 58 mm, housing bore (D) 75 mm, and height (h) 15.50 mm. Any deviation in the shaft or housing can lead to leaks or a poor fit, so measure the old seal and the mating surfaces before ordering.
You will find this seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers, and power transmission assemblies. Its job is to hold oil or grease inside while blocking dust, water, and particles. Because it is a wear part, replace it when you notice oil weeping or unusual noise around the seal area.
During installation, inspect the shaft for burrs or deep marks on the sealing surface. Apply a light film of the same lubricant used in the equipment to the lip, then press the seal in using a tool that contacts only the metal case. Never drive on the lip. Selection also depends on peripheral speed, temperature, and the fluid being retained; if you are unsure, share your equipment data and we will help you choose.
If you need an equivalent, send the complete seal code (9485Pol) or the shaft, bore, and height dimensions. With that information we can search for alternatives within the DBH line or other brands we supply. We can also evaluate a replacement if the design is similar.
To request a quote for the DBH 9485Pol seal, message us on WhatsApp or email with the code and the quantity you need. Our team replies promptly. If you are replacing several seals, ask about other seals in the same line to consolidate your request.
Dimensions
- Shaft (d)
- 58mm
- Housing bore (D)
- 75mm
- Height (h)
- 15.50mm
- Design
- A 324
Frequently asked questions
- What are the dimensions of the DBH 9485Pol seal?
- The DBH 9485Pol seal has a 58 mm shaft diameter, a 75 mm housing bore, and a 15.50 mm height. Compare these with your old seal before ordering.
- What applications is this seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, motors, and transmission equipment. It retains lubricant and excludes contaminants under moderate speed and temperature conditions, provided the shaft and housing are in good shape.
- How do I request a quote or an equivalent?
- Send us the code 9485Pol or your seal dimensions via WhatsApp or email. We will provide a quote and, if needed, look for a compatible alternative. You can also ask about other seals from the same brand.