DBH 9096Pol radial shaft seal — 19 x 42 x 7

DBH 9096Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9096Pol and any equivalents.

The DBH 9096Pol is a radial shaft seal that keeps oil or grease in and contaminants out where a shaft rotates. With a 19 mm shaft, a 42 mm housing bore and a 7.00 mm height, it fits gearboxes, pumps, motors and transmissions. MR Industrial Accessories supplies this brand and helps you match the seal to your equipment.

The designation 9096Pol identifies this lip seal. Its three key measurements are shaft 19 mm, housing bore 42 mm and height 7.00 mm. The Lx design uses a single lip with a spring, so it holds lubricant in and keeps dust out while the shaft turns. It drops into any housing machined to these standard dimensions.

You will typically find a seal this size in gearboxes, centrifugal pumps, electric motors, compressors and belt- or chain-driven transmissions. In each case it sits on the shaft and inside the housing, separating the lubricant from the surrounding environment. Food, chemical and process plants also rely on it where fluid containment matters for cleanliness and loss prevention.

When selecting the 9096Pol, confirm the shaft measures 19 mm, the bore 42 mm and the height 7.00 mm. The Lx lip with spring needs a ground shaft surface that is lubricated during installation. Check that the shaft has no burrs or heavy wear and that the housing is clean and undistorted. For high peripheral speeds or elevated temperatures, ask our team about the lip material.

For an equivalent, send code 9096Pol or the dimensions you measured on your equipment. We compare them against the manufacturer's data and offer options in the same series or with similar characteristics. We can also guide you on fitting and the tools that prevent lip damage during installation.

To request a quote for this DBH 9096Pol oil seal, message us on WhatsApp or email and mention code 9096Pol. Our technical team will help you find the part your process needs.