DBH 8628Vit radial shaft seal — 32 x 47 x 6

DBH 8628Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8628Vit and any equivalents.

The DBH 8628Vit is a radial shaft seal, also called an oil seal, sized for a 32 mm shaft, a 47 mm housing bore and a 6.00 mm height. Its Lx-R-H design covers a sealing lip, a reinforced body and a retaining spring. Pressed into the housing and running against the rotating shaft, it keeps oil or grease in and keeps dust and water out of pumps, motors, gearboxes and transmission cases.

Reading the designation helps when you reorder. The 8628Vit code is tied to the size and design shown on the product page, and the three figures that matter are taken from the old part: shaft 32 mm, housing 47 mm, height 6.00 mm. The Lx-R-H configuration combines a sealing lip, a reinforced body and a retaining spring for rotating shafts that run with lubrication. DBH is one of the brands MR supplies, so this seal follows that standard seal line.

Seals of this size show up in centrifugal pumps, electric motors, gearboxes, transmission shafts and continuous process equipment. In every case the job is the same: hold the lubricant inside the assembly and block contaminants from entering. Machine tools, industrial washing equipment and conveyor systems also use them, where the shaft turns at moderate speed and keeping the seal intact protects the bearings.

When fitting the seal, confirm the shaft and housing are clean and free of burrs or scratches, and that the measurements match the product page: shaft 32 mm, housing 47 mm, height 6.00 mm. Coat the lip with the same oil or grease the equipment uses, then press the seal in square to the shaft without hitting the lip. A worn shaft may call for a repair sleeve. Speed, temperature and lubricant type all affect the choice.

To get a quote, send the code 8628Vit or the three dimensions of the old seal: shaft diameter, housing diameter and height. A photo of the part and the housing also helps. MR compares that information against the options and comes back with a compatible alternative. If the size is non-standard, ask and we will look into sourcing it.

For a quote on the DBH 8628Vit oil seal, message us on WhatsApp with the code and the quantity you need. MR replies with alternatives and can advise on installation or on picking an equivalent seal for your equipment's operating conditions.