DBH 8627Pol radial shaft seal — 32 x 47 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8627Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8627Pol and any equivalents.
A radial shaft seal that presses into the housing and rides on the rotating shaft, the DBH 8627Pol keeps lubricant where it belongs and keeps dust, water and particles out. The Lx-H configuration pairs a sealing lip with a metal outer case sized for press-fit installation. Gearboxes, pumps, electric motors and similar transmission equipment are the usual homes for this seal. It forms part of the seals and oil seals range we supply.
The reference is DBH 8627Pol. Reading the numbers gives the three key measurements: shaft 32.00 mm, housing 47.00 mm, height 8.00 mm. Because the Lx-H design uses a lip plus a metal case, the seal is driven into the cavity rather than fitted over the shaft. Keeping the code handy makes it straightforward to match against other options in the same category.
Seals of this size turn up in gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission assemblies. Two jobs are done at once: oil or grease stays inside, and contaminants stay outside. Treat it as a wear item and check it whenever leakage appears or the seal area starts making unusual noise.
Installation rewards a little care. The shaft should sit within tolerance and be free of burrs or scoring that could cut the lip. The housing needs to be clean, with the entry chamfer intact. Coat the lip with lubricant before fitting, then press on the outer face with a proper tool, never on the lip itself. Sitting square to the shaft is what keeps the seal from weeping early.
Looking for a substitute? Send the code 8627Pol plus the shaft, housing and height figures, and describe the application. That is enough for us to check for a comparable item in the same category or propose a design variant. Naming the fluid being retained and the rotation speed helps narrow things down faster.
For a quote on the DBH 8627Pol or to ask about other sizes, message us on WhatsApp or by email with the code and dimensions. We answer promptly, suggest equivalents and help you pick the right seal for the equipment.
Dimensions
- Shaft (d)
- 32mm
- Housing bore (D)
- 47mm
- Height (h)
- 8.00mm
- Design
- Lx-H
Frequently asked questions
- What are the dimensions of the DBH 8627Pol oil seal?
- Shaft 32.00 mm, housing 47.00 mm, height 8.00 mm. These nominal figures appear in the designation and are the ones to use when comparing against other seals in the same category.
- Where is this radial shaft seal typically used?
- Gearboxes, pumps, electric motors and transmission equipment with rotating motion. It holds lubricant in and keeps dust or water out, and as a wear part it should be checked when leaks or noises show up.
- How do I request a quote or an equivalent for the 8627Pol?
- Contact us on WhatsApp or by email with the code 8627Pol and the shaft, housing and height dimensions. For an equivalent, add the fluid to be retained and the rotation speed so we can narrow the options.