DBH 8626Vit radial shaft seal — 70 x 87 x 8.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8626Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8626Vit and any equivalents.
The DBH 8626Vit is a radial shaft seal built to hold lubricant in and keep contaminants out of rotating assemblies. Its designation reads as 70 mm shaft, 87 mm housing and 8.50 mm height, so it fits equipment that uses that standard size. DBH is one of the seal brands we supply, and we can also look at comparable options when you send us the code.
The reference 8626Vit identifies a seal from the DBH line. Reading the numbers in order gives the shaft diameter first (70 mm), then the housing bore (87 mm) and finally the height (8.50 mm). The Lx-R-AH configuration combines a retaining lip with a dust lip, which is the arrangement chosen when external particles are a concern. In service, the seal closes off the gap where oil or grease would otherwise escape along a turning shaft.
You will find this size in gearboxes, pumps, electric motors, rollers and power transmission drives. In each case the seal keeps lubricant where it belongs and blocks dust, water and chips from reaching the bearings and gears. Agricultural machinery, process equipment and continuous conveying lines are common places to see it, since a failed seal there usually means unplanned downtime.
Before fitting a replacement, check the shaft for hardness, surface finish and any burrs or marks that could cut the lip. Coat the lip with the same oil or grease the equipment runs on, then press the seal in by its outer diameter with a proper driver rather than striking the lip. When selecting, take into account peripheral speed, operating temperature and how the elastomer reacts to the fluid being sealed.
If you need an equivalent, send the code 8626Vit or the dimensions 70x87x8.50 on WhatsApp. We can search other brands or similar lip arrangements as long as the shaft and housing diameters stay the same, and we can point you toward the lip design that best matches your application.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 87mm
- Height (h)
- 8.50mm
- Design
- Lx-R-AH
Frequently asked questions
- What size is the DBH 8626Vit oil seal?
- It is a 70 mm shaft seal with an 87 mm housing diameter and 8.50 mm height. Those three figures appear in the designation and let you match it against the bore and shaft of the equipment you are servicing.
- What does the Lx-R-AH designation tell me?
- It describes a seal with a retaining lip plus a dust lip. Along with keeping lubricant in, that second lip adds a barrier against dust and water from outside, which helps the seal and the bearing last longer.
- How do I ask for a quote or an equivalent seal?
- Message us on WhatsApp with the code 8626Vit or with 70x87x8.50. We can quote that item and also check equivalent alternatives in other brands or configurations, keeping the shaft and housing dimensions unchanged.