DBH 8629Pol radial shaft seal — 60 x 80 x 8

DBH 8629Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8629Pol and any equivalents.

The DBH 8629Pol is a radial lip seal for rotating shafts, designed to keep lubricant in and contaminants out. With a shaft diameter of 60 mm, housing bore of 80 mm, and height of 8.00 mm, it fits a range of industrial equipment. MR supplies this seal and can help you confirm the right configuration for your application.

This seal carries the DBH designation 8629Pol and follows the Lx-R-AH design, which defines the lip geometry and outer body profile. Key dimensions are: shaft 60 mm, housing 80 mm, height 8.00 mm. Always verify these values against your existing part or housing drawing before ordering.

Typical installations include gearboxes, reducers, centrifugal pumps, electric motors, compressors, and machine tools. The seal is also used on rollers and conveyors where oil or grease retention is critical and dust, chips, or water must be kept out. Its compact cross-section suits housings with limited axial space.

For proper selection, confirm that the shaft and housing diameters match the listed values, and that the 8.00 mm height fits your groove without distortion. The lip design must suit the rotation direction and lubricant type. The shaft surface should be smooth and free of burrs; lubricate the lip before installation and press only on the outer edge.

To request a quote for part number 8629Pol, send the dimensions of your current seal—shaft, housing, and height—or a photo with a caliper for scale. MR can check for an equivalent in DBH or another supplied brand, respecting the original lip type and design. We can also advise if your existing seal has a special geometry.

For a quote on the 8629Pol seal or an alternative, contact MR via WhatsApp or email with the part number and dimensions. We respond with technical details so you can confirm before purchase.