Skip to main content
All products
DBH type Mx radial shaft seal, double lip with one spring, in section · DBH 8011Pol
DBH 8011Pol radial shaft seal — 43 x 62 x 12

DBHBrand We Carry

DBH 8011Pol radial shaft seal — 43 x 62 x 12

Manufacturer part number8011Pol
Brand
DBH
Category
Seals
Get a quote for 8011Pol on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

DBH 8011Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8011Pol and any equivalents.

For rotating shafts, the DBH 8011Pol radial shaft seal keeps lubricant contained and blocks outside contaminants. Its dimensions are 43 mm for the shaft, 62 mm for the housing bore and 12 mm for the width, with an Mx design. MR Industrial Accessories LLC supplies this brand and can help you confirm the correct seal for your equipment.

The 8011Pol belongs to the DBH line of radial shaft seals. The Mx design uses a metal body with a sealing lip, a common setup for retaining oil or grease on rotating shafts. Reading the code is straightforward: the 8011Pol designation identifies the seal in catalogs and maintenance records, while the dimensions are given as shaft 43 mm, housing 62 mm and width 12 mm. The width is often written as 12.00 mm.

You will find this seal in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. In each case it separates the lubricant from the environment, keeping dust, water and particles away from bearings and gears. Because it is a wear part, it is often replaced during preventive maintenance.

Correct installation matters. Check the shaft for the specified hardness and roughness, and make sure there are no burrs or marks that could harm the lip. Apply lubricant to the lip before fitting, and press the seal in by its outer diameter with a proper tool, never on the lip. The 12.00 mm width must match the housing to avoid leaks or axial movement.

If you need an equivalent from another brand, we can help. We offer alternatives in different qualities and materials. Send the part number 8011Pol or the dimensions 43x62x12 mm through WhatsApp or email, and our team will reply promptly with a quote and guidance for your application.

If compatibility is unclear, send a photo of the part or the housing together with the part number. We will confirm whether the DBH 8011Pol is the right choice or suggest a variant. Contact us on WhatsApp or by email and we will respond quickly.

Dimensions

Shaft (d)
43mm
Housing bore (D)
62mm
Height (h)
12.00mm
Design
Mx

Frequently asked questions

What are the dimensions of the DBH 8011Pol oil seal?
The seal has a 43 mm shaft diameter, a 62 mm housing diameter and a 12.00 mm width. These standard dimensions allow it to be interchanged with other oil seals of similar designation.
How can I request a quote for the 8011Pol?
Send the part number 8011Pol or the dimensions 43x62x12 mm via WhatsApp or email. Our team will reply promptly with purchasing options.
Do you offer equivalents from other brands for the 8011Pol?
Yes, we can suggest alternatives from other brands that match the same dimensions. Contact us on WhatsApp or by email with the part number or dimensions, and we will advise you on the best option for your application.
Get a quote for 8011Pol on WhatsApp
Quote on WhatsApp