DBH 8010Pol radial shaft seal — 92 x 108 x 9.8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8010Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8010Pol and any equivalents.
A radial shaft seal keeps lubricant where it belongs and keeps contaminants out. The DBH 8010Pol is a lip seal that fits a 92 mm shaft, a 108 mm housing bore and a 9.80 mm height, and it carries the Lx-R designation. MR Industrial Accessories supplies this brand and quotes by part number.
Read the code before you order. The 8010Pol identifies the seal itself, while the three figures that follow describe the bore it fills: shaft 92 mm, housing 108 mm, width 9.80 mm. The Lx-R marking describes how the lip and body are built for a lubricated rotating shaft. This is a sealing component, so it does not carry shaft load the way a bearing or a bushing does. Keep the original code on hand when you compare it against the worn part.
Seals of this size turn up in gearboxes, centrifugal pumps, mixers, conveyors and similar transmission equipment, wherever a shaft spins inside a housing and oil or grease has to stay in place. Machine tools and process lines that run continuously also use them, since grit and moisture working past a seal will shorten bearing life. The job is always the same: hold the lubricant in and keep the outside out.
Installation decides how long the seal lasts. Clean the shaft and the housing bore, remove burrs and any drag marks, then coat the lip with lubricant before you press it in. Seat it square to the bore and never strike the lip directly. When you select a replacement, factor in shaft speed, operating temperature and the fluid being retained, because the wrong lip compound wears out fast. A scored shaft is worth addressing with a repair sleeve or a different size before you fit another seal.
For an equivalent, send the code 8010Pol with the shaft, housing and height figures, plus the equipment brand if you have it. A photo of the old seal and the mounting area also helps. Complete information lets us confirm a compatible option from the seal lines we supply without back and forth.
Dimensions
- Shaft (d)
- 92mm
- Housing bore (D)
- 108mm
- Height (h)
- 9.80mm
- Design
- Lx-R
Frequently asked questions
- What size is the DBH 8010Pol radial shaft seal?
- It is listed for a 92 mm shaft, a 108 mm housing bore and a 9.80 mm height, with the Lx-R design. Measure the seal you are replacing before ordering, since a small difference will prevent it from seating correctly.
- How do I ask for an equivalent to the 8010Pol?
- Send the code 8010Pol together with the shaft, housing and height dimensions on WhatsApp or by email. Add the equipment brand if you know it, and we will check the seal lines we supply for a compatible option.
- What does Lx-R tell me about this seal?
- Lx-R is the manufacturer's designation for the lip and body arrangement used on a lubricated rotating shaft. It is a guide to the sealing style rather than a full specification, so contact us with the code and dimensions if you need construction details.