DBH 8009Vit radial shaft seal — 79 x 95.25 x 11.11

DBH 8009Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8009Vit and any equivalents.

When a rotating shaft needs its lubricant kept in and outside contamination kept out, the DBH 8009Vit radial lip seal is one of the options we supply. Its size envelope is a 79 mm shaft, a 95.25 mm housing bore and an 11.11 mm width, and it uses the Mx-R design. This makes it a candidate for gearboxes, pumps and transmission equipment where there is not much room along the shaft axis. We list it within our seals and oil seals range for maintenance and replacement work.

Reading the DBH 8009Vit reference is straightforward. The three figures that matter for fit are shaft 79 mm, housing 95.25 mm and width 11.11 mm. The Mx-R designation describes a seal with a metal outer body and a sealing lip, which is a common arrangement on shafts running with oil or grease. Those figures come from the manufacturer's data sheet, and they are what tell you whether the part will interchange with the one you are removing.

You will typically find this seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools, as well as on drive shafts in agricultural and general industrial machinery. In all of these, its job is to hold lubricant in place and to keep dust and water out. Before fitting a replacement, check that the shaft surface is not badly worn and that its roughness suits a lip seal.

Dimensions alone do not decide the choice. Shaft speed at the lip, the temperature the seal will see and the lubricant in use all affect whether the Mx-R design is the right one. It suits medium speeds and moderately dirty surroundings. At installation, put lubricant on the lip first, drive the seal in with a press or a proper installation tool rather than by hand, and keep the spring facing the fluid you want to retain.

If you need the same dimensions in another design, or a close variant, send the original part number, the shaft, housing and width measurements, and a photo of the seal. With that we can search the DBH line and the other brands we supply. We can also tell you if the Mx-R design is not the best match for your operating conditions.

To get a quote for the DBH 8009Vit or to ask about a replacement, send the part number by WhatsApp or email. Our team replies promptly. If selection or installation is unclear, we can help you settle on the right seal for the equipment.