DBH 8013Pol radial shaft seal — 40 x 75 x 12

DBH 8013Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8013Pol and any equivalents.

The DBH 8013Pol is a radial shaft seal built to keep lubricant in and contaminants out of rotating equipment. It fits a 40 mm shaft, a 75 mm housing bore, and has a 12.00 mm height, with an A 050-R design. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your application.

This lip seal from DBH carries the code 8013Pol. The dimensions are shaft 40 mm, housing 75 mm, and width 12.00 mm. The A 050-R designation identifies a particular construction within the DBH seal range. The seal combines an elastomer lip that rides on the shaft with a metal case that presses into the housing.

You will find seals in this size range in gearboxes, pumps, electric motors, rollers, and power transmission assemblies. They are used wherever a shaft turns inside a fixed housing and oil or grease must stay contained while bearings and gears are protected from dust, water, and particles. As a wear part, it should be replaced when lubricant starts to escape or when the lip becomes stiff, cut, or unevenly worn.

During installation, check that the shaft surface is free of burrs and deep marks in the lip contact area, and that the housing bore is clean and undistorted. Lubricate the lip before fitting, keep the seal square to the shaft, and press on the metal case with a proper tool, never on the lip. When selecting a seal, account for the actual shaft and housing dimensions, the lubricant type, the operating temperature, and the peripheral speed. If anything is unclear, contact us and we will help you validate the choice.

If you need an equivalent to the 8013Pol, the fastest route is to send the code, a photo of the part, and caliper measurements. An assembly drawing or the equipment code where it mounts also works. With that information we can search alternatives within the same brand or other lines we carry, always matching dimensions and sealing design. We confirm against the manufacturer's data sheet before quoting.

MR Industrial Accessories works with seals and oil seals every day and knows the common applications in industry. If the DBH 8013Pol is the one you need, send the code via WhatsApp and we will prepare your quote. If you are unsure about the size, write to us anyway and we will help you identify the correct replacement.