DBH 6608 radial shaft seal — 134 x 168.05 x 14.28

DBH 6608 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6608 and any equivalents.

The DBH 6608 is a radial shaft seal that stops oil or grease from escaping where a rotating shaft passes through a housing. Its Lx design pairs a sealing lip with a metal case that presses into the housing bore. It fits a 134 mm shaft, a 168.05 mm housing bore and a 14.28 mm height, and it is found in gearboxes, pumps and transmission equipment where lubricant retention and dust exclusion matter.

This seal belongs to the DBH line and carries the code 6608. The three dimensions to work from are shaft 134 mm, housing bore 168.05 mm, width 14.28 mm, with Lx construction. In an Lx seal, the lip does the sealing while the metal case holds the shape and provides the press fit into the housing. The 6608 number is part of the brand's numbering system and is what you use to order the exact replacement.

Seals of this size turn up in medium-to-large rotating equipment: gearboxes, reducers, centrifugal pumps, mills, mixers, and belt or chain drives. The job is always the same: hold the lubricant in and keep particles, water or steam out. You will also see them on industrial fan shafts and on rollers in continuous-process machinery.

Before ordering, confirm three values: shaft diameter, housing bore diameter and height. For the 6608 those are 134 mm, 168.05 mm and 14.28 mm. The shaft surface under the lip should be polished and free of burrs, and the housing clean and undistorted. During installation, lubricate the lip and press on the metal edge with a proper driver, never on the lip itself.

If you need an alternative, send the code 6608 along with the shaft and housing bore dimensions measured on your equipment. We can then check for a match from the same brand or another line. If the shaft or housing shows wear, re-measure before ordering, because a few tenths of a millimeter can change which seal fits.

MR Industrial Accessories LLC supplies the DBH brand as part of its seals and oil seals range. If the 6608 is the one your equipment uses, send the code on WhatsApp or by email and we will quote it. You can also ask about other sizes in the same family or about seals for worn shafts, and we will help you choose.