DBH 6610 radial shaft seal — 135 x 165 x 15
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6610 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6610 and any equivalents.
The DBH 6610 is a radial shaft seal of the lip type. It sits on the rotating shaft and seals against the housing bore, holding lubricant in and keeping dust and water out. Shaft 135 mm, housing 165 mm, height 15.00 mm, Lx design. This is a size that shows up often on mid-size industrial equipment, and MR Industrial Accessories LLC supplies it as a brand.
Reading the code and the numbers is the fastest way to confirm a replacement. The DBH 6610 is a single-lip seal: shaft (d) 135 mm, housing (D) 165 mm, height (h) 15.00 mm, Lx design. The lip rides on the shaft while the outer diameter presses into the bore, so the two surfaces together keep the lubricant where it belongs and contamination out. Gearboxes, pumps and transmission rollers are typical places to find it.
Anywhere a shaft turns inside a housing is a candidate: speed reducers, centrifugal pumps, mixers, roller conveyors, machine tools. In dusty or wet areas the seal is what shields the bearings, so the assembly keeps running as it should. Where vibration or temperature runs high, it pays to inspect the lip more often than the normal service interval.
Installation calls for a clean shaft with no burrs or marks on the sealing surface. Lubricate the lip before pressing it in, and seat it square to the shaft. The Lx designation covers the lip geometry and the fit style. A chamfered bore or a worn shaft may call for a different size or a repair sleeve. Match on shaft diameter, housing diameter and height rather than on the code alone.
If you want a cross to another brand, give us the shaft diameter, the housing diameter and the height, or just the number stamped on the old seal. A photo of the part and of the housing works too. We check the match before quoting.
Send code 6610 or the dimensions on WhatsApp to MR Industrial Accessories LLC for a quote. Questions about installation or the condition of the housing are welcome, and we will help you pick the right seal.
Dimensions
- Shaft (d)
- 135mm
- Housing bore (D)
- 165mm
- Height (h)
- 15.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 6610 oil seal?
- Shaft 135 mm, housing 165 mm, height 15.00 mm, Lx design. Those are the figures from the data sheet, and they are what you compare against the seal currently in the machine.
- How do I request an equivalent?
- Send code 6610 on WhatsApp, or the shaft diameter, housing diameter and height of the old seal. We look for a cross from another brand and confirm the match before quoting.
- What does the Lx design mean in a seal?
- Lx refers to the lip geometry and the fit style, as listed in the data sheet. It is used when comparing against the original seal. If anything is unclear, send us the code and dimensions and we will check it with you.