DBH 5831Sil radial shaft seal — 38.1 x 60.3 x 15.87

DBH 5831Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5831Sil and any equivalents.

The DBH 5831Sil is a radial shaft seal that keeps oil or grease contained where a shaft turns through a housing. Its lip runs against the shaft while the outer diameter holds in the bore, blocking lubricant loss and keeping dust out. With a 38.10 mm shaft, 60.30 mm housing and 15.87 mm height, it fits gearboxes, pumps and motors where axial room is tight. MR supplies it within its seals and oil seals range.

This seal follows the A 083 design, a single lip with a spring for rotating shafts under lubrication. The code 5831Sil places it in the DBH line. Dimensions to match are shaft 38.10 mm, housing 60.30 mm and height 15.87 mm. Confirm these three values on your equipment before ordering: a different height or diameter will not seat or seal as needed.

You will find it in gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment, as well as in agricultural and industrial machinery exposed to dust or water. Install it with the lip toward the fluid side and the spring facing inward. Where vibration or misalignment is present, consider a stiffer design or a double-lip seal.

Selection depends on shaft speed, operating temperature and the lubricant in use. The shaft should be ground and free of marks; wear prevents the lip from seating and causes leaks. The housing must be clean and deburred. During installation, coat the lip with the same oil or grease as the equipment and use a support tube to avoid damage. If a previous seal failed, check bearing clearance and shaft concentricity as well.

To request a quote, send the code 5831Sil or your shaft, housing and height measurements. We check the DBH line and other brands we carry. We can also tell you whether the A 083 design suits your application or if a different lip type or material is needed. Speed, temperature and fluid details help us refine the proposal.

Send the DBH 5831Sil code by WhatsApp or email to MR. If you are unsure of the size, include a photo of the old seal or caliper readings. That lets us confirm the part matches your equipment before quoting.